dmesg - Hybrid Base gnupg 120221
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-16-generic (buildd@allspice) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #28-Ubuntu SMP Fri Jan 27 17:44:39 UTC 2012 (Ubuntu 3.0.0-16.28-generic 3.0.17)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0-16-generic root=/dev/mapper/system-root ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfda0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfda0000 - 00000000cfdd1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfdd1000 - 00000000cfe00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000042f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-990FXA-UD3/GA-990FXA-UD3, BIOS F5 10/13/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x42f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000042f000000 aka 17136M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 3326M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
[ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfda0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f4b70] f4b70
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfda0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfc00000 page 2M
[ 0.000000] 00cfc00000 - 00cfda0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfda0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000042f000000
[ 0.000000] 0100000000 - 0400000000 page 1G
[ 0.000000] 0400000000 - 042f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 42f000000 @ cfd9e000-cfda0000
[ 0.000000] RAMDISK: 35968000 - 36cac000
[ 0.000000] ACPI: RSDP 00000000000f6a90 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfdd1000 0004C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfdd1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfdd1100 07997 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfda0000 00040
[ 0.000000] ACPI: MSDM 00000000cfdd8b80 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: HPET 00000000cfdd8c00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfdd8c40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000cfdd8cc0 00034 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000cfdd8d30 00202 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000cfdd8ac0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000cfdd8f40 0648F (v01 MATS RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000cfddf440 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: IVRS 00000000cfde0bd0 000F8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000042f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000042f000000
[ 0.000000] NODE_DATA [000000042effb000 - 000000042effffff]
[ 0.000000] [ffffea0000000000-ffffea000ebfffff] PMD -> [ffff88041e600000-ffff88042c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0042f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfda0
[ 0.000000] 0: 0x00100000 -> 0x0042f000
[ 0.000000] On node 0 totalpages: 4189487
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 832984 pages, LIFO batch:31
[ 0.000000] Normal zone: 45640 pages used for memmap
[ 0.000000] Normal zone: 3292600 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfda0000 - 00000000cfdd1000
[ 0.000000] PM: Registered nosave memory: 00000000cfdd1000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88042ec00000 s79616 r8192 d22784 u262144
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4129506
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-16-generic root=/dev/mapper/system-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ f200000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 16358720k/17547264k available (6138k kernel code, 789316k absent, 399228k reserved, 6896k data, 988k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 134217728 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3120.817 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6241.63 BogoMIPS (lpj=12483268)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004028] Security Framework initialized
[ 0.004038] AppArmor: AppArmor initialized
[ 0.004039] Yama: becoming mindful.
[ 0.005615] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.009868] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011541] Mount-cache hash table entries: 256
[ 0.011644] Initializing cgroup subsys cpuacct
[ 0.011648] Initializing cgroup subsys memory
[ 0.011655] Initializing cgroup subsys devices
[ 0.011656] Initializing cgroup subsys freezer
[ 0.011658] Initializing cgroup subsys net_cls
[ 0.011659] Initializing cgroup subsys blkio
[ 0.011664] Initializing cgroup subsys perf_event
[ 0.011685] tseg: 00cff00000
[ 0.011686] CPU: Physical Processor ID: 0
[ 0.011687] CPU: Processor Core ID: 0
[ 0.011689] mce: CPU supports 7 MCE banks
[ 0.013032] ACPI: Core revision 20110413
[ 0.016021] ftrace: allocating 25737 entries in 101 pages
[ 0.020345] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061299] CPU0: AMD FX(tm)-8120 Eight-Core Processor stepping 02
[ 0.064003] Performance Events: AMD Family 15h PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 6
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000003f
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.152070] #2
[ 0.152071] smpboot cpu 2: start_ip = 9a000
[ 0.244095] #3
[ 0.244098] smpboot cpu 3: start_ip = 9a000
[ 0.336074] #4
[ 0.336075] smpboot cpu 4: start_ip = 9a000
[ 0.428083] #5
[ 0.428084] smpboot cpu 5: start_ip = 9a000
[ 0.520091] #6
[ 0.520092] smpboot cpu 6: start_ip = 9a000
[ 0.612102] #7 Ok.
[ 0.612104] smpboot cpu 7: start_ip = 9a000
[ 0.704048] Brought up 8 CPUs
[ 0.704051] Total of 8 processors activated (49931.29 BogoMIPS).
[ 0.708196] devtmpfs: initialized
[ 0.712080] PM: Registering ACPI NVS region at cfda0000 (200704 bytes)
[ 0.713346] print_constraints: dummy:
[ 0.713364] Time: 1:15:22 Date: 02/22/12
[ 0.713395] NET: Registered protocol family 16
[ 0.713404] Trying to unpack rootfs image as initramfs...
[ 0.713516] Extended Config Space enabled on 1 nodes
[ 0.713563] ACPI: bus type pci registered
[ 0.713618] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.713622] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.748322] PCI: Using configuration type 1 for base access
[ 0.749214] bio: create slab at 0
[ 0.749378] ACPI: EC: Look up EC in DSDT
[ 0.760214] ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20110413/tbutils-314)
[ 0.760393] ACPI: Interpreter enabled
[ 0.760397] ACPI: (supports S0 S3 S4 S5)
[ 0.760422] ACPI: Using IOAPIC for interrupt routing
[ 0.983230] ACPI: No dock devices found.
[ 0.983233] HEST: Table not found.
[ 0.983236] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.983307] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.983462] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.983466] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.983468] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.983471] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.983474] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.983477] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
[ 0.983493] pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600
[ 0.983507] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.983550] pci 0000:00:00.2: [1002:5a23] type 0 class 0x000806
[ 0.983608] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
[ 0.983636] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.983640] pci 0000:00:02.0: PME# disabled
[ 0.983661] pci 0000:00:09.0: [1002:5a1c] type 1 class 0x000604
[ 0.983689] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.983692] pci 0000:00:09.0: PME# disabled
[ 0.983710] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604
[ 0.983741] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.983745] pci 0000:00:0a.0: PME# disabled
[ 0.983770] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.983786] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.983795] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.983803] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.983811] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.983820] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.983828] pci 0000:00:11.0: reg 24: [mem 0xfdfff000-0xfdfff3ff]
[ 0.983845] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.983875] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.983889] pci 0000:00:12.0: reg 10: [mem 0xfdffe000-0xfdffefff]
[ 0.983951] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.983967] pci 0000:00:12.2: reg 10: [mem 0xfdffd000-0xfdffd0ff]
[ 0.984024] pci 0000:00:12.2: supports D1 D2
[ 0.984027] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.984031] pci 0000:00:12.2: PME# disabled
[ 0.984049] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.984067] pci 0000:00:13.0: reg 10: [mem 0xfdffc000-0xfdffcfff]
[ 0.984125] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.984144] pci 0000:00:13.2: reg 10: [mem 0xfdffb000-0xfdffb0ff]
[ 0.984201] pci 0000:00:13.2: supports D1 D2
[ 0.984204] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.984208] pci 0000:00:13.2: PME# disabled
[ 0.984227] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.984287] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.984298] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.984308] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.984316] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.984324] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.984333] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.984363] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.984380] pci 0000:00:14.2: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
[ 0.984426] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.984430] pci 0000:00:14.2: PME# disabled
[ 0.984442] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.984506] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.984543] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.984557] pci 0000:00:14.5: reg 10: [mem 0xfdffa000-0xfdffafff]
[ 0.984616] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.984661] pci 0000:00:15.0: supports D1 D2
[ 0.984685] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[ 0.984729] pci 0000:00:15.1: supports D1 D2
[ 0.984749] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
[ 0.984794] pci 0000:00:15.2: supports D1 D2
[ 0.984817] pci 0000:00:15.3: [1002:43a3] type 1 class 0x000604
[ 0.984862] pci 0000:00:15.3: supports D1 D2
[ 0.984884] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.984895] pci 0000:00:16.0: reg 10: [mem 0xfdff9000-0xfdff9fff]
[ 0.984956] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.984974] pci 0000:00:16.2: reg 10: [mem 0xfdff8000-0xfdff80ff]
[ 0.985032] pci 0000:00:16.2: supports D1 D2
[ 0.985035] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.985039] pci 0000:00:16.2: PME# disabled
[ 0.985057] pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
[ 0.985079] pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
[ 0.985096] pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
[ 0.985116] pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
[ 0.985142] pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
[ 0.985159] pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
[ 0.985213] pci 0000:01:00.0: [1002:6739] type 0 class 0x000300
[ 0.985228] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.985241] pci 0000:01:00.0: reg 18: [mem 0xfddc0000-0xfdddffff 64bit]
[ 0.985249] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
[ 0.985264] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.985289] pci 0000:01:00.0: supports D1 D2
[ 0.985314] pci 0000:01:00.1: [1002:aa88] type 0 class 0x000403
[ 0.985330] pci 0000:01:00.1: reg 10: [mem 0xfddfc000-0xfddfffff 64bit]
[ 0.985382] pci 0000:01:00.1: supports D1 D2
[ 0.992078] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.992083] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.992086] pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.992091] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.992131] pci 0000:02:00.0: [1b6f:7023] type 0 class 0x000c03
[ 0.992147] pci 0000:02:00.0: reg 10: [mem 0xfdaf8000-0xfdafffff 64bit]
[ 0.992205] pci 0000:02:00.0: supports D1 D2
[ 0.992207] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.992211] pci 0000:02:00.0: PME# disabled
[ 1.000076] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 1.000082] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 1.000087] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 1.000091] pci 0000:00:09.0: bridge window [mem 0xfd100000-0xfd1fffff 64bit pref]
[ 1.000132] pci 0000:03:00.0: [1b4b:917a] type 0 class 0x000101
[ 1.000143] pci 0000:03:00.0: reg 10: [io 0xcf00-0xcf07]
[ 1.000150] pci 0000:03:00.0: reg 14: [io 0xce00-0xce03]
[ 1.000158] pci 0000:03:00.0: reg 18: [io 0xcd00-0xcd07]
[ 1.000165] pci 0000:03:00.0: reg 1c: [io 0xcc00-0xcc03]
[ 1.000172] pci 0000:03:00.0: reg 20: [io 0xcb00-0xcb0f]
[ 1.000183] pci 0000:03:00.0: reg 24: [mem 0xfd0ff000-0xfd0ff1ff]
[ 1.000191] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 1.000212] pci 0000:03:00.0: PME# supported from D3hot
[ 1.000215] pci 0000:03:00.0: PME# disabled
[ 1.008074] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 1.008079] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 1.008082] pci 0000:00:0a.0: bridge window [mem 0xfd000000-0xfd0fffff]
[ 1.008087] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 1.008131] pci 0000:04:0e.0: [1106:3044] type 0 class 0x000c00
[ 1.008153] pci 0000:04:0e.0: reg 10: [mem 0xfdcff000-0xfdcff7ff]
[ 1.008165] pci 0000:04:0e.0: reg 14: [io 0xbf00-0xbf7f]
[ 1.008237] pci 0000:04:0e.0: supports D2
[ 1.008239] pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
[ 1.008244] pci 0000:04:0e.0: PME# disabled
[ 1.008275] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 1.008282] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 1.008286] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 1.008290] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref]
[ 1.008293] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.008296] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.008299] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.008302] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 1.008306] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 1.008309] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[ 1.008366] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 1.008383] pci 0000:05:00.0: reg 10: [io 0xae00-0xaeff]
[ 1.008409] pci 0000:05:00.0: reg 18: [mem 0xfd8ff000-0xfd8fffff 64bit pref]
[ 1.008427] pci 0000:05:00.0: reg 20: [mem 0xfd8f8000-0xfd8fbfff 64bit pref]
[ 1.008473] pci 0000:05:00.0: supports D1 D2
[ 1.008475] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.008480] pci 0000:05:00.0: PME# disabled
[ 1.016078] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 1.016084] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 1.016088] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 1.016093] pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 1.016151] pci 0000:06:00.0: [1b6f:7023] type 0 class 0x000c03
[ 1.016173] pci 0000:06:00.0: reg 10: [mem 0xfd7f8000-0xfd7fffff 64bit]
[ 1.016252] pci 0000:06:00.0: supports D1 D2
[ 1.016254] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.016259] pci 0000:06:00.0: PME# disabled
[ 1.022933] Freeing initrd memory: 19728k freed
[ 1.024098] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 1.024116] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff]
[ 1.024125] pci 0000:00:15.1: bridge window [mem 0xfd700000-0xfd7fffff]
[ 1.024135] pci 0000:00:15.1: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 1.024214] pci 0000:00:15.2: PCI bridge to [bus 07-07]
[ 1.024224] pci 0000:00:15.2: bridge window [io 0x8000-0x8fff]
[ 1.024233] pci 0000:00:15.2: bridge window [mem 0xfd500000-0xfd5fffff]
[ 1.024244] pci 0000:00:15.2: bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
[ 1.024317] pci 0000:00:15.3: PCI bridge to [bus 08-08]
[ 1.024327] pci 0000:00:15.3: bridge window [io 0x7000-0x7fff]
[ 1.024336] pci 0000:00:15.3: bridge window [mem 0xfd300000-0xfd3fffff]
[ 1.024347] pci 0000:00:15.3: bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
[ 1.024398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.025530] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 1.025653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 1.025766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 1.025877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 1.026009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 1.026186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 1.026341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 1.026449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 1.026569] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.026579] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 1.026583] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.042716] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[ 1.042759] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[ 1.042800] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[ 1.042840] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[ 1.042880] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[ 1.042919] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[ 1.042958] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[ 1.043000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[ 1.043098] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.043103] vgaarb: loaded
[ 1.043104] vgaarb: bridge control possible 0000:01:00.0
[ 1.043264] SCSI subsystem initialized
[ 1.043277] libata version 3.00 loaded.
[ 1.043277] usbcore: registered new interface driver usbfs
[ 1.043277] usbcore: registered new interface driver hub
[ 1.043277] usbcore: registered new device driver usb
[ 1.043277] PCI: Using ACPI for IRQ routing
[ 1.049701] PCI: pci_cache_line_size set to 64 bytes
[ 1.049711] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 1.049804] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 1.049806] reserve RAM buffer: 00000000cfda0000 - 00000000cfffffff
[ 1.049808] reserve RAM buffer: 000000042f000000 - 000000042fffffff
[ 1.049886] NetLabel: Initializing
[ 1.049888] NetLabel: domain hash size = 128
[ 1.049889] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.049898] NetLabel: unlabeled traffic allowed by default
[ 1.049932] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.049935] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.051982] Switching to clocksource hpet
[ 1.052016] Switched to NOHz mode on CPU #0
[ 1.051997] Switched to NOHz mode on CPU #5
[ 1.051998] Switched to NOHz mode on CPU #6
[ 1.051991] Switched to NOHz mode on CPU #3
[ 1.051985] Switched to NOHz mode on CPU #1
[ 1.051992] Switched to NOHz mode on CPU #4
[ 1.052003] Switched to NOHz mode on CPU #7
[ 1.051990] Switched to NOHz mode on CPU #2
[ 1.053476] AppArmor: AppArmor Filesystem Enabled
[ 1.053491] pnp: PnP ACPI init
[ 1.053502] ACPI: bus type pnp registered
[ 1.053580] pnp 00:00: [bus 00-ff]
[ 1.053583] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.053585] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.053587] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.053589] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.053591] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 1.053593] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.053595] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
[ 1.053631] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.053642] pnp 00:01: [io 0x0010-0x001f]
[ 1.053643] pnp 00:01: [io 0x0022-0x003f]
[ 1.053645] pnp 00:01: [io 0x0044-0x004d]
[ 1.053647] pnp 00:01: [io 0x0050-0x005f]
[ 1.053648] pnp 00:01: [io 0x0062-0x0063]
[ 1.053650] pnp 00:01: [io 0x0065-0x006f]
[ 1.053652] pnp 00:01: [io 0x0074-0x007f]
[ 1.053653] pnp 00:01: [io 0x0091-0x0093]
[ 1.053655] pnp 00:01: [io 0x00a2-0x00bf]
[ 1.053657] pnp 00:01: [io 0x00e0-0x00ef]
[ 1.053658] pnp 00:01: [io 0x04d0-0x04d1]
[ 1.053660] pnp 00:01: [io 0x0220-0x0225]
[ 1.053662] pnp 00:01: [io 0x0290-0x0294]
[ 1.053713] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 1.053716] system 00:01: [io 0x0220-0x0225] has been reserved
[ 1.053718] system 00:01: [io 0x0290-0x0294] has been reserved
[ 1.053721] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.054166] pnp 00:02: [io 0x0900-0x091f]
[ 1.054169] pnp 00:02: [io 0x0228-0x022f]
[ 1.054171] pnp 00:02: [io 0x040b]
[ 1.054172] pnp 00:02: [io 0x04d6]
[ 1.054174] pnp 00:02: [io 0x0c00-0x0c01]
[ 1.054175] pnp 00:02: [io 0x0c14]
[ 1.054177] pnp 00:02: [io 0x0c50-0x0c52]
[ 1.054178] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 1.054180] pnp 00:02: [io 0x0c6f]
[ 1.054181] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 1.054183] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 1.054185] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 1.054186] pnp 00:02: [io 0x0800-0x08fe]
[ 1.054188] pnp 00:02: [io 0x0a10-0x0a17]
[ 1.054189] pnp 00:02: [io 0x0b00-0x0b0f]
[ 1.054191] pnp 00:02: [io 0x0b10-0x0b1f]
[ 1.054192] pnp 00:02: [io 0x0b20-0x0b3f]
[ 1.054194] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 1.054199] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 1.054203] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.054236] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 1.054244] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 1.054278] system 00:02: [io 0x0900-0x091f] has been reserved
[ 1.054280] system 00:02: [io 0x0228-0x022f] has been reserved
[ 1.054283] system 00:02: [io 0x040b] has been reserved
[ 1.054285] system 00:02: [io 0x04d6] has been reserved
[ 1.054287] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 1.054289] system 00:02: [io 0x0c14] has been reserved
[ 1.054291] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 1.054293] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 1.054295] system 00:02: [io 0x0c6f] has been reserved
[ 1.054298] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 1.054300] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 1.054302] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 1.054304] system 00:02: [io 0x0800-0x08fe] has been reserved
[ 1.054306] system 00:02: [io 0x0a10-0x0a17] has been reserved
[ 1.054309] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 1.054313] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 1.054315] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 1.054317] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 1.054321] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.054416] pnp 00:03: [dma 4]
[ 1.054418] pnp 00:03: [io 0x0000-0x000f]
[ 1.054420] pnp 00:03: [io 0x0080-0x0090]
[ 1.054422] pnp 00:03: [io 0x0094-0x009f]
[ 1.054423] pnp 00:03: [io 0x00c0-0x00df]
[ 1.054449] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.054502] pnp 00:04: [irq 0 disabled]
[ 1.054509] pnp 00:04: [irq 8]
[ 1.054511] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 1.054537] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.054567] pnp 00:05: [io 0x0070-0x0073]
[ 1.054593] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.054601] pnp 00:06: [io 0x0061]
[ 1.054626] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.054634] pnp 00:07: [io 0x00f0-0x00ff]
[ 1.054637] pnp 00:07: [irq 13]
[ 1.054665] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.054954] pnp 00:08: [io 0x03f8-0x03ff]
[ 1.054958] pnp 00:08: [irq 4]
[ 1.055012] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.055046] pnp 00:09: [io 0x0060]
[ 1.055048] pnp 00:09: [io 0x0064]
[ 1.055051] pnp 00:09: [irq 1]
[ 1.055086] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.055118] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 1.055169] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.055172] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.055308] pnp 00:0b: [mem 0x000f0000-0x000f3fff]
[ 1.055310] pnp 00:0b: [mem 0x000f4000-0x000f7fff]
[ 1.055312] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
[ 1.055314] pnp 00:0b: [mem 0x000fc000-0x000fffff]
[ 1.055316] pnp 00:0b: [mem 0xcfda0000-0xcfdfffff]
[ 1.055317] pnp 00:0b: [mem 0xffff0000-0xffffffff]
[ 1.055319] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 1.055321] pnp 00:0b: [mem 0x00100000-0xcfd9ffff]
[ 1.055323] pnp 00:0b: [mem 0xcfe00000-0xcfefffff]
[ 1.055324] pnp 00:0b: [mem 0xcff00000-0xcfffffff]
[ 1.055326] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 1.055328] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 1.055329] pnp 00:0b: [mem 0xfff80000-0xfffeffff]
[ 1.055333] pnp 00:0b: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.055337] pnp 00:0b: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.055340] pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.055343] pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.055346] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.055350] pnp 00:0b: disabling [mem 0x00100000-0xcfd9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.055416] system 00:0b: [mem 0xcfda0000-0xcfdfffff] could not be reserved
[ 1.055418] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[ 1.055421] system 00:0b: [mem 0xcfe00000-0xcfefffff] has been reserved
[ 1.055423] system 00:0b: [mem 0xcff00000-0xcfffffff] could not be reserved
[ 1.055426] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.055428] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 1.055431] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
[ 1.055433] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.055452] pnp: PnP ACPI: found 12 devices
[ 1.055454] ACPI: ACPI bus type pnp unregistered
[ 1.061174] PCI: max bus depth: 1 pci_try_num: 2
[ 1.061209] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[ 1.061212] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 1.061215] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 1.061218] pci 0000:00:02.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 1.061221] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.061224] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 1.061226] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 1.061229] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 1.061232] pci 0000:00:09.0: bridge window [mem 0xfd100000-0xfd1fffff 64bit pref]
[ 1.061237] pci 0000:03:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
[ 1.061239] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 1.061241] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 1.061244] pci 0000:00:0a.0: bridge window [mem 0xfd000000-0xfd0fffff]
[ 1.061246] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 1.061250] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 1.061253] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 1.061257] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 1.061260] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref]
[ 1.061266] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 1.061268] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 1.061272] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 1.061275] pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 1.061280] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 1.061282] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff]
[ 1.061286] pci 0000:00:15.1: bridge window [mem 0xfd700000-0xfd7fffff]
[ 1.061289] pci 0000:00:15.1: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 1.061294] pci 0000:00:15.2: PCI bridge to [bus 07-07]
[ 1.061296] pci 0000:00:15.2: bridge window [io 0x8000-0x8fff]
[ 1.061300] pci 0000:00:15.2: bridge window [mem 0xfd500000-0xfd5fffff]
[ 1.061303] pci 0000:00:15.2: bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
[ 1.061308] pci 0000:00:15.3: PCI bridge to [bus 08-08]
[ 1.061310] pci 0000:00:15.3: bridge window [io 0x7000-0x7fff]
[ 1.061314] pci 0000:00:15.3: bridge window [mem 0xfd300000-0xfd3fffff]
[ 1.061317] pci 0000:00:15.3: bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
[ 1.061329] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.061333] pci 0000:00:02.0: setting latency timer to 64
[ 1.061341] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.061344] pci 0000:00:09.0: setting latency timer to 64
[ 1.061348] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.061350] pci 0000:00:0a.0: setting latency timer to 64
[ 1.061359] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.061362] pci 0000:00:15.0: setting latency timer to 64
[ 1.061367] pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.061370] pci 0000:00:15.1: setting latency timer to 64
[ 1.061375] pci 0000:00:15.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.061378] pci 0000:00:15.2: setting latency timer to 64
[ 1.061383] pci 0000:00:15.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.061386] pci 0000:00:15.3: setting latency timer to 64
[ 1.061389] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.061392] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.061394] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.061396] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 1.061398] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 1.061400] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff]
[ 1.061402] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.061404] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 1.061406] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.061408] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 1.061410] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
[ 1.061412] pci_bus 0000:02: resource 2 [mem 0xfd100000-0xfd1fffff 64bit pref]
[ 1.061414] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 1.061416] pci_bus 0000:03: resource 1 [mem 0xfd000000-0xfd0fffff]
[ 1.061418] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 1.061421] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.061422] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 1.061425] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
[ 1.061427] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.061429] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.061431] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.061433] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 1.061434] pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff]
[ 1.061436] pci_bus 0000:04: resource 9 [mem 0xd0000000-0xfebfffff]
[ 1.061439] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 1.061440] pci_bus 0000:05: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 1.061443] pci_bus 0000:05: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 1.061445] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
[ 1.061447] pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 1.061449] pci_bus 0000:06: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 1.061451] pci_bus 0000:07: resource 0 [io 0x8000-0x8fff]
[ 1.061453] pci_bus 0000:07: resource 1 [mem 0xfd500000-0xfd5fffff]
[ 1.061455] pci_bus 0000:07: resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
[ 1.061457] pci_bus 0000:08: resource 0 [io 0x7000-0x7fff]
[ 1.061459] pci_bus 0000:08: resource 1 [mem 0xfd300000-0xfd3fffff]
[ 1.061461] pci_bus 0000:08: resource 2 [mem 0xfd200000-0xfd2fffff 64bit pref]
[ 1.061487] NET: Registered protocol family 2
[ 1.061957] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.063615] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.065351] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.065545] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.065547] TCP reno registered
[ 1.065577] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.065657] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.065791] NET: Registered protocol family 1
[ 1.356097] pci 0000:01:00.0: Boot video device
[ 1.356173] PCI: CLS 64 bytes, default 64
[ 1.356439] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 1.356441] pci 0000:00:00.2: PCI INT A: no GSI
[ 1.356671] pci 0000:00:00.2: irq 40 for MSI/MSI-X
[ 1.356736] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40
[ 1.421643] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.421645] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.421648] Placing 64MB software IO TLB between ffff8800cbd9e000 - ffff8800cfd9e000
[ 1.421650] software IO TLB at phys 0xcbd9e000 - 0xcfd9e000
[ 1.422271] audit: initializing netlink socket (disabled)
[ 1.422279] type=2000 audit(1329873322.416:1): initialized
[ 1.460476] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.504636] VFS: Disk quotas dquot_6.5.2
[ 1.504687] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.505245] fuse init (API version 7.16)
[ 1.505317] msgmni has been set to 31989
[ 1.505721] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.505753] io scheduler noop registered
[ 1.505755] io scheduler deadline registered
[ 1.505788] io scheduler cfq registered (default)
[ 1.506080] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.506099] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.506188] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.506194] ACPI: Power Button [PWRB]
[ 1.506232] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.506235] ACPI: Power Button [PWRF]
[ 1.506256] ACPI: acpi_idle registered with cpuidle
[ 1.704834] ERST: Table is not found!
[ 1.725230] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.747068] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.747301] Linux agpgart interface v0.103
[ 1.748187] brd: module loaded
[ 1.748587] loop: module loaded
[ 1.748706] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.748741] pata_acpi 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.748754] pata_acpi 0000:03:00.0: setting latency timer to 64
[ 1.748762] pata_acpi 0000:03:00.0: PCI INT A disabled
[ 1.749008] Fixed MDIO Bus: probed
[ 1.749027] PPP generic driver version 2.4.2
[ 1.749054] tun: Universal TUN/TAP device driver, 1.6
[ 1.749055] tun: (C) 1999-2004 Max Krasnyansky
[ 1.749113] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.749123] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.749159] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.749187] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.749194] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.749216] QUIRK: Enable AMD PLL fix
[ 1.749225] ehci_hcd 0000:00:12.2: debug port 1
[ 1.749244] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
[ 1.760046] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.760143] hub 1-0:1.0: USB hub found
[ 1.760148] hub 1-0:1.0: 5 ports detected
[ 1.760210] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.760221] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.760247] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.760254] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.760273] ehci_hcd 0000:00:13.2: debug port 1
[ 1.760282] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
[ 1.772045] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.772134] hub 2-0:1.0: USB hub found
[ 1.772137] hub 2-0:1.0: 5 ports detected
[ 1.772197] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.772208] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.772232] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.772238] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.772256] ehci_hcd 0000:00:16.2: debug port 1
[ 1.772265] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
[ 1.784039] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.784126] hub 3-0:1.0: USB hub found
[ 1.784129] hub 3-0:1.0: 4 ports detected
[ 1.784189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.784199] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.784210] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.784235] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.784257] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
[ 1.844105] hub 4-0:1.0: USB hub found
[ 1.844110] hub 4-0:1.0: 5 ports detected
[ 1.844169] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.844182] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.844213] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.844226] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
[ 1.904102] hub 5-0:1.0: USB hub found
[ 1.904108] hub 5-0:1.0: 5 ports detected
[ 1.904169] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.904181] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.904210] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.904224] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
[ 1.964114] hub 6-0:1.0: USB hub found
[ 1.964119] hub 6-0:1.0: 2 ports detected
[ 1.964175] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.964186] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.964211] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.964225] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
[ 2.024101] hub 7-0:1.0: USB hub found
[ 2.024106] hub 7-0:1.0: 4 ports detected
[ 2.024166] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.024212] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.024214] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.024325] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.024399] mousedev: PS/2 mouse device common for all mice
[ 2.024481] rtc_cmos 00:05: RTC can wake from S4
[ 2.024549] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.024568] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.024647] device-mapper: uevent: version 1.0.3
[ 2.024704] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[ 2.024828] cpuidle: using governor ladder
[ 2.025052] cpuidle: using governor menu
[ 2.025054] EFI Variables Facility v0.08 2004-May-17
[ 2.025252] TCP cubic registered
[ 2.025352] NET: Registered protocol family 10
[ 2.025782] NET: Registered protocol family 17
[ 2.025792] Registering the dns_resolver key type
[ 2.025860] PM: Hibernation image not present or could not be loaded.
[ 2.025869] registered taskstats version 1
[ 2.053154] Magic number: 0:450:256
[ 2.053284] rtc_cmos 00:05: setting system clock to 2012-02-22 01:15:24 UTC (1329873324)
[ 2.053335] powernow-k8: Found 1 AMD FX(tm)-8120 Eight-Core Processor (8 cpu cores) (version 2.20.00)
[ 2.053372] powernow-k8: Core Performance Boosting: on.
[ 2.053425] powernow-k8: 0 : pstate 0 (3100 MHz)
[ 2.053427] powernow-k8: 1 : pstate 1 (2800 MHz)
[ 2.053428] powernow-k8: 2 : pstate 2 (2300 MHz)
[ 2.053430] powernow-k8: 3 : pstate 3 (1900 MHz)
[ 2.053431] powernow-k8: 4 : pstate 4 (1400 MHz)
[ 2.054240] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.054242] EDD information not available.
[ 2.056702] Freeing unused kernel memory: 988k freed
[ 2.056893] Write protecting the kernel read-only data: 12288k
[ 2.062838] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.064984] Freeing unused kernel memory: 2036k freed
[ 2.070683] Freeing unused kernel memory: 1388k freed
[ 2.076035] usb 1-3: new high speed USB device number 2 using ehci_hcd
[ 2.088318] udevd[102]: starting version 173
[ 2.103932] wmi: Mapper loaded
[ 2.106832] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.106859] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 2.106863] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.106920] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 2.107012] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfdaf8000
[ 2.107028] xhci_hcd 0000:02:00.0: Failed to enable MSI-X
[ 2.107074] xhci_hcd 0000:02:00.0: irq 41 for MSI/MSI-X
[ 2.107354] xHCI xhci_add_endpoint called for root hub
[ 2.107357] xHCI xhci_check_bandwidth called for root hub
[ 2.107386] hub 8-0:1.0: USB hub found
[ 2.107393] hub 8-0:1.0: 2 ports detected
[ 2.107478] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.107530] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 2.107612] xHCI xhci_add_endpoint called for root hub
[ 2.107614] xHCI xhci_check_bandwidth called for root hub
[ 2.107634] hub 9-0:1.0: USB hub found
[ 2.107640] hub 9-0:1.0: 2 ports detected
[ 2.107692] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.107711] xhci_hcd 0000:06:00.0: setting latency timer to 64
[ 2.107715] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 2.108957] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 10
[ 2.109076] xhci_hcd 0000:06:00.0: irq 17, io mem 0xfd7f8000
[ 2.109093] xhci_hcd 0000:06:00.0: Failed to enable MSI-X
[ 2.109139] xhci_hcd 0000:06:00.0: irq 42 for MSI/MSI-X
[ 2.110254] xHCI xhci_add_endpoint called for root hub
[ 2.110257] xHCI xhci_check_bandwidth called for root hub
[ 2.110309] hub 10-0:1.0: USB hub found
[ 2.110317] hub 10-0:1.0: 2 ports detected
[ 2.110588] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 2.110869] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 11
[ 2.111559] ahci 0000:00:11.0: version 3.0
[ 2.111579] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.111683] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.111687] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.111820] xHCI xhci_add_endpoint called for root hub
[ 2.111823] xHCI xhci_check_bandwidth called for root hub
[ 2.111864] hub 11-0:1.0: USB hub found
[ 2.111873] hub 11-0:1.0: 2 ports detected
[ 2.113465] scsi0 : ahci
[ 2.113746] scsi1 : ahci
[ 2.115710] scsi2 : ahci
[ 2.116374] scsi3 : ahci
[ 2.118319] ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
[ 2.118324] ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
[ 2.118328] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
[ 2.118331] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
[ 2.119209] scsi4 : pata_atiixp
[ 2.120236] scsi5 : pata_atiixp
[ 2.121139] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 2.121143] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.122779] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.122795] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.122832] r8169 0000:05:00.0: setting latency timer to 64
[ 2.122840] r8169 0000:05:00.0: (unregistered net_device): unknown MAC, using family default
[ 2.122908] r8169 0000:05:00.0: irq 43 for MSI/MSI-X
[ 2.123682] r8169 0000:05:00.0: eth0: RTL8168b/8111b at 0xffffc900125dc000, 50:e5:49:c4:61:b7, XID 0c900800 IRQ 43
[ 2.287345] ata5.00: ATA-8: ST1500DL003-9VT16L, CC3C, max UDMA/133
[ 2.287348] ata5.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.287353] ata5.00: limited to UDMA/33 due to 40-wire cable
[ 2.300612] ata5.00: configured for UDMA/33
[ 2.420127] Refined TSC clocksource calibration: 3120.771 MHz.
[ 2.420137] Switching to clocksource tsc
[ 2.548116] usb 7-1: new low speed USB device number 2 using ohci_hcd
[ 2.608118] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.608153] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.608183] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.608210] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.653150] ata1.00: ATA-7: ST3400620NS, 3.CNK, max UDMA/133
[ 2.653157] ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.655942] ata4.00: ATA-7: ST3400620NS, 3.CNK, max UDMA/133
[ 2.655949] ata4.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.657871] ata2.00: ATA-7: ST3400620NS, 3.AEE, max UDMA/133
[ 2.657878] ata2.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.664057] ata3.00: ATA-7: ST3400620NS, 3.AEE, max UDMA/133
[ 2.664064] ata3.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.711425] ata1.00: configured for UDMA/133
[ 2.711640] scsi 0:0:0:0: Direct-Access ATA ST3400620NS 3.CN PQ: 0 ANSI: 5
[ 2.711761] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.711830] sd 0:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.711908] sd 0:0:0:0: [sda] Write Protect is off
[ 2.711911] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.711942] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.714249] ata4.00: configured for UDMA/133
[ 2.724408] ata2.00: configured for UDMA/133
[ 2.724492] scsi 1:0:0:0: Direct-Access ATA ST3400620NS 3.AE PQ: 0 ANSI: 5
[ 2.724615] sd 1:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.724634] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.724694] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.724697] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.724727] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.730686] ata3.00: configured for UDMA/133
[ 2.730931] scsi 2:0:0:0: Direct-Access ATA ST3400620NS 3.AE PQ: 0 ANSI: 5
[ 2.731021] sd 2:0:0:0: [sdc] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.731044] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.731062] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.731065] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.731102] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.731146] scsi 3:0:0:0: Direct-Access ATA ST3400620NS 3.CN PQ: 0 ANSI: 5
[ 2.731279] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.731349] sd 3:0:0:0: [sdd] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.731393] scsi 4:0:0:0: Direct-Access ATA ST1500DL003-9VT1 CC3C PQ: 0 ANSI: 5
[ 2.731405] sd 3:0:0:0: [sdd] Write Protect is off
[ 2.731408] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.731433] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.731614] sd 4:0:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.731617] sd 4:0:0:0: [sde] 4096-byte physical blocks
[ 2.731635] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 2.731674] sd 4:0:0:0: [sde] Write Protect is off
[ 2.731677] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.731700] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.751133] sda: sda1
[ 2.751536] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.753944] sdd: sdd1
[ 2.754343] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 2.758794] sde: sde1
[ 2.759211] sd 4:0:0:0: [sde] Attached SCSI disk
[ 2.764175] sdb: sdb1
[ 2.764500] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.770355] sdc: sdc1
[ 2.770771] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.772561] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.775549] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.0/input/input3
[ 2.775917] generic-usb 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:16.0-1/input0
[ 2.775952] usbcore: registered new interface driver usbhid
[ 2.775955] usbhid: USB HID core driver
[ 2.840093] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 2.879491] md: bind
[ 2.883897] md: bind
[ 2.889746] md: bind
[ 2.936053] md: bind
[ 2.951721] async_tx: api initialized (async)
[ 3.020083] raid6: int64x1 1608 MB/s
[ 3.088092] raid6: int64x2 2569 MB/s
[ 3.156086] raid6: int64x4 2535 MB/s
[ 3.158585] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 3.158588] vesafb: scrolling: redraw
[ 3.158590] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 3.224009] raid6: int64x8 1793 MB/s
[ 3.292009] raid6: sse2x1 4054 MB/s
[ 3.360007] raid6: sse2x2 6422 MB/s
[ 3.428006] raid6: sse2x4 6897 MB/s
[ 3.428008] raid6: using algorithm sse2x4 (6897 MB/s)
[ 3.435284] firewire_core: created device fw0: GUID 0049e550963e0600, S400
[ 3.435806] xor: automatically using best checksumming function: generic_sse
[ 3.436114] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90012c00000, using 5824k, total 5824k
[ 3.436227] Console: switching to colour frame buffer device 175x65
[ 3.436252] fb0: VESA VGA frame buffer device
[ 3.452016] generic_sse: 10761.000 MB/sec
[ 3.452018] xor: using function: generic_sse (10761.000 MB/sec)
[ 3.452847] md: raid6 personality registered for level 6
[ 3.452849] md: raid5 personality registered for level 5
[ 3.452850] md: raid4 personality registered for level 4
[ 3.452991] bio: create slab at 1
[ 3.453005] md/raid:md0: device sda1 operational as raid disk 0
[ 3.453008] md/raid:md0: device sdb1 operational as raid disk 1
[ 3.453010] md/raid:md0: device sdd1 operational as raid disk 3
[ 3.453012] md/raid:md0: device sdc1 operational as raid disk 2
[ 3.453459] md/raid:md0: allocated 4282kB
[ 3.453495] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 3.453497] RAID conf printout:
[ 3.453498] --- level:5 rd:4 wd:4
[ 3.453500] disk 0, o:1, dev:sda1
[ 3.453501] disk 1, o:1, dev:sdb1
[ 3.453503] disk 2, o:1, dev:sdc1
[ 3.453504] disk 3, o:1, dev:sdd1
[ 3.453526] md0: detected capacity change from 0 to 1200257236992
[ 3.455480] md0: unknown partition table
[ 4.259792] md: linear personality registered for level -1
[ 4.261247] md: multipath personality registered for level -4
[ 4.262706] md: raid0 personality registered for level 0
[ 4.264193] md: raid1 personality registered for level 1
[ 4.270275] md: raid10 personality registered for level 10
[ 4.357410] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.089750] udevd[456]: starting version 173
[ 6.204902] Adding 39059452k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:39059452k
[ 6.399613] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro
[ 6.666166] lp: driver loaded but no devices found
[ 6.770190] it87: Found IT8720F chip at 0x228, revision 8
[ 6.770208] it87: Routing internal VCCH to in7
[ 6.770212] it87: Beeping is supported
[ 6.770405] hwmon_vid: Unknown VRM version of your x86 CPU
[ 6.944041] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.988407] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.990067] MCE: In-kernel MCE decoding enabled.
[ 7.013575] EDAC MC: Ver: 2.1.0
[ 7.014060] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 7.014063] Disabling lock debugging due to kernel taint
[ 7.039552] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 7.040446] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 7.056049] [fglrx] Maximum main memory to use for locked dma buffers: 15624 MBytes.
[ 7.056199] [fglrx] vendor: 1002 device: 6739 count: 1
[ 7.056850] [fglrx] ioport: bar 4, base 0xee00, size: 0x100
[ 7.056860] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.056865] pci 0000:01:00.0: setting latency timer to 64
[ 7.057393] [fglrx] Kernel PAT support is enabled
[ 7.057407] [fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
[ 7.064201] AMD64 EDAC driver v3.4.0
[ 7.064220] EDAC amd64: DRAM ECC disabled.
[ 7.064231] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 7.064233] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 7.064234] (Note that use of the override may cause unknown side effects.)
[ 7.161552] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 7.567642] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.705867] cfg80211: Calling CRDA to update world regulatory domain
[ 7.770034] hda_codec: ALC889: BIOS auto-probing.
[ 7.780020] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 7.780159] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 7.780234] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 7.780256] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 7.845174] type=1400 audit(1329873330.290:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=725 comm="apparmor_parser"
[ 7.845186] type=1400 audit(1329873330.290:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=699 comm="apparmor_parser"
[ 7.845606] type=1400 audit(1329873330.290:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
[ 7.845623] type=1400 audit(1329873330.290:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=699 comm="apparmor_parser"
[ 7.845759] type=1400 audit(1329873330.290:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
[ 7.845897] type=1400 audit(1329873330.290:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=699 comm="apparmor_parser"
[ 7.893899] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 7.894017] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input5
[ 7.991543] cfg80211: World regulatory domain updated:
[ 7.991546] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.991549] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.991552] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.991554] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.991556] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.991558] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.298052] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 8.298055] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 8.298058] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 8.298060] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 8.298062] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 8.298065] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 8.298067] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 8.298069] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 8.298071] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 8.298073] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 8.298075] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 8.298077] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 8.298079] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 8.298082] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 8.298084] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 8.298086] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 8.298088] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 8.298090] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 8.298092] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 8.298094] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 8.298096] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 8.298099] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 8.298100] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 8.298103] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 8.298105] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 8.298107] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 8.298109] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 8.298111] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 8.327672] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.328228] Registered led device: rt2800usb-phy0::radio
[ 8.328251] Registered led device: rt2800usb-phy0::assoc
[ 8.328270] Registered led device: rt2800usb-phy0::quality
[ 8.328664] usbcore: registered new interface driver rt2800usb
[ 9.084243] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.216320] ppdev: user-space parallel port driver
[ 9.312151] type=1400 audit(1329873331.758:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1153 comm="apparmor_parser"
[ 9.312663] type=1400 audit(1329873331.758:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1153 comm="apparmor_parser"
[ 11.474978] wlan0: authenticate with c0:c1:c0:0c:9f:1d (try 1)
[ 11.478338] wlan0: authenticated
[ 11.546917] wlan0: associate with c0:c1:c0:0c:9f:1d (try 1)
[ 11.549950] wlan0: RX AssocResp from c0:c1:c0:0c:9f:1d (capab=0x411 status=0 aid=6)
[ 11.549958] wlan0: associated
[ 11.588393] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 12.972284] init: failsafe main process (988) killed by TERM signal
[ 13.014275] wlan0: deauthenticating from c0:c1:c0:0c:9f:1d by local choice (reason=3)
[ 13.098909] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 13.098913] cfg80211: Restoring regulatory settings
[ 13.098916] cfg80211: Calling CRDA to update world regulatory domain
[ 13.101646] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 13.101649] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 13.101651] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 13.101653] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 13.101655] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 13.101657] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 13.101658] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 13.101660] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 13.101662] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 13.101664] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 13.101666] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 13.101668] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 13.101669] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 13.101671] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 13.101673] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 13.101675] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 13.101677] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 13.101678] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 13.101680] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 13.101682] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 13.101684] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 13.101686] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 13.101687] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 13.101689] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 13.101691] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 13.101693] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 13.101695] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 13.101697] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 13.101699] cfg80211: World regulatory domain updated:
[ 13.101700] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.101702] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.101704] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.101706] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.101708] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.101710] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.154799] type=1400 audit(1329873335.598:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1284 comm="apparmor_parser"
[ 13.155192] type=1400 audit(1329873335.598:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1284 comm="apparmor_parser"
[ 13.155298] type=1400 audit(1329873335.598:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1285 comm="apparmor_parser"
[ 13.155427] type=1400 audit(1329873335.598:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1284 comm="apparmor_parser"
[ 13.155751] type=1400 audit(1329873335.598:14): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1285 comm="apparmor_parser"
[ 13.187955] type=1400 audit(1329873335.630:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1287 comm="apparmor_parser"
[ 13.188116] type=1400 audit(1329873335.634:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1286 comm="apparmor_parser"
[ 13.188396] type=1400 audit(1329873335.634:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1286 comm="apparmor_parser"
[ 13.597549] init: apport pre-start process (1354) terminated with status 1
[ 13.599782] init: apport post-stop process (1382) terminated with status 1
[ 13.684680] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.855241] fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[ 14.855789] [fglrx] Firegl kernel thread PID: 1450
[ 14.855841] [fglrx] Firegl kernel thread PID: 1451
[ 14.855888] [fglrx] Firegl kernel thread PID: 1452
[ 14.856293] [fglrx] IRQ 45 Enabled
[ 15.193384] [fglrx] Gart USWC size:1280 M.
[ 15.193388] [fglrx] Gart cacheable size:508 M.
[ 15.193393] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 15.193396] [fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000
[ 15.193398] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 15.454003] Bluetooth: Core ver 2.16
[ 15.454021] NET: Registered protocol family 31
[ 15.454023] Bluetooth: HCI device and connection manager initialized
[ 15.454025] Bluetooth: HCI socket layer initialized
[ 15.454027] Bluetooth: L2CAP socket layer initialized
[ 15.454067] Bluetooth: SCO socket layer initialized
[ 15.474289] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.474291] Bluetooth: BNEP filters: protocol multicast
[ 15.513242] Bluetooth: RFCOMM TTY layer initialized
[ 15.513247] Bluetooth: RFCOMM socket layer initialized
[ 15.513249] Bluetooth: RFCOMM ver 1.11
[ 15.652049] wlan0: authenticate with c0:c1:c0:0c:9f:1d (try 1)
[ 15.653659] wlan0: authenticated
[ 15.673295] wlan0: associate with c0:c1:c0:0c:9f:1d (try 1)
[ 15.677530] wlan0: RX AssocResp from c0:c1:c0:0c:9f:1d (capab=0x411 status=0 aid=6)
[ 15.677538] wlan0: associated
[ 15.706067] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=0
[ 15.706109] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 15.707521] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=1
[ 15.707532] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 15.710080] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 20.773371] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,commit=0
[ 20.776139] EXT4-fs (sde1): re-mounted. Opts: commit=0
[ 20.805605] EXT4-fs (dm-0): re-mounted. Opts: commit=0
[ 21.405179] init: plymouth-stop pre-start process (1632) terminated with status 1
[ 33.811831] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,commit=0
[ 33.814485] EXT4-fs (sde1): re-mounted. Opts: commit=0
[ 33.972378] EXT4-fs (dm-0): re-mounted. Opts: commit=0
[ 125.968732] r8169 0000:05:00.0: eth0: link down
[ 125.971802] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 440.725963] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 440.725988] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 440.742868] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 440.742882] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 440.786942] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=0
[ 440.786965] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 440.788521] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=1
[ 440.788543] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 656.158023] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 656.158045] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 656.171519] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 656.171539] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 656.199171] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=0
[ 656.199191] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 656.200639] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=1
[ 656.200655] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 3362.466689] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 3362.466711] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 3362.483518] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 3362.483539] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 3364.744116] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=0
[ 3364.744144] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 3364.745638] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=1
[ 3364.745656] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[11233.568201] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=1
[11233.568223] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[11233.585040] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
[11233.585061] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[11235.012749] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=0
[11235.012771] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[11235.014240] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=1
[11235.014257] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[11913.994309] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=1
[11913.994334] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[11914.011085] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
[11914.011112] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[11915.717029] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=0
[11915.717051] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[11915.718530] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=1
[11915.718546] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[12515.819024] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=1
[12515.819050] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[12515.835830] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
[12515.835857] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[12517.268443] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=0
[12517.268468] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[12517.269951] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=1
[12517.269967] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[13117.360482] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=1
[13117.360509] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[13117.377271] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
[13117.377297] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[13118.752723] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=0
[13118.752748] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[13118.754356] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=1
[13118.754375] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[13958.637987] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=1
[13958.638011] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[13958.654915] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
[13958.654935] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[13960.226313] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=0
[13960.226336] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[13960.229099] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=1
[13960.229119] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1